Home > Forum > GamerMaker Support > Question about the folding edges of the Tri-Fold Board.
Question about the folding edges of the Tri-Fold Board.
  • Posted By : kdolan1973
    Member Since: 6th December 2017
    Posted on: 11th December 2017 2:11 PM
    I'm designing the artwork I need for the Tri-Fold game board. I have couple of questions about folding edges.

    1) How visible are they when the board is laid flat? Will they interfere with the artwork in an obvious way?

    3) What location are the folding edges at on the board? I thought about just assuming they are at 1/3 and 2/3 of the length of the board, but looking at how it folds, it sees likely that they are going to be a bit off from there.

    Thanks
  • Posted By : Ivory
    Member Since: 21st April 2016
    Posted on: 11th December 2017 2:20 PM
    Hi Kdolan1973,

    The fold area sits as you have said around 1/3 and 2/3 of the board and is slightly indented.
    meaning they are visible but should effect the boards play greatly.

    Regards,
    Ash.
Sorry you must be logged in to post.